K1S | OTTO Controls

K1S

The K1S is a short-behind-panel, sealed, logic level only rocker switch offering 1M cycle life in a snap-in package.

Available in both single and double pole configurations with maintained action, this ON-ON-ON rocker is perfect for use as a Forward-Neutral-Reverse (FNR) switch. The double pole version offers redundancy for each switch state providing increased safety. Termination options include a Molex connector or wire leads. The K1S contact system is sealed to IP68S and uses a flow-thru design. With an optional boot, the switch is panel sealed to IP68S.

The rugged K1S is shorter behind panel than OTTO’s K1 rocker series, making it an ideal choice for use in grips and panels.

Hybrid Supercapacitors | Eaton

Eaton's HS hybrid supercapacitors are small-footprint, high-power energy storage devices ideal for a host of energy and industrial applications.

Eaton’s HS supercapacitors comprise new proprietary materials. Each supercapacitor has two electrodes, one similar to that of a battery and one a standard supercapacitor electrode. Consequently, their energy densities are closer to those of conventional batteries and up to 10 times higher than standard supercapacitors. 

Each hybrid cylindrical cell offers between 30 F and 220 F of capacitance with a maximum working voltage of 3.8 V, an operating temperature range from -25 °C to +70 °C, and ultra-low ESR. HS supercapacitors can be utilized as sole energy storage or alongside batteries to optimize system cost, lifetime, and runtime. While HSL supercapacitors are optimized for lower temperatures, going down to -25 °C, HS supercapacitors have an extended range to +85 °C and are optimized for higher temperatures.

MJD45H11 | NEXPERIA

80 V, 8 A PNP high power bipolar transistor

PNP high power bipolar transistor in a power DPAK, TO-252 (SOT428C) Surface-Mounted Device (SMD) plastic package.

LEJ & LEJA Series | Airpax

Hydraulic-Magnetic Circuit Breakers

The LEJ/LEJA series circuit breaker meets the evolving demand for the high performance protection of critical data center and telecommunications applications requiring up to 277VAC per pole, UL 489 listing in the smallest case size currently available in the marketplace. The LEJ/LEJA platform is based on the highly successful and field proven LEG/LEGA designs while incorporating state-of-the-art arc quenching technologies and offering voltage ratings that are well suited for global applications that require 208VAC through 277VAC ratings for increased power efficiency.

Typical applications include power distribution units (PDUs) used in data center enclosures, telecom AC power supplies and a variety of Industrial applications benefiting from the higher power density. Like the LEG/LEGA product family, the LEJ/LEJA series offers a variety of features including different terminations and actuators to meet most any requirements.

Small Package TCXO Portfolio Expansion | CTS

Low Noise TCXO Models 516, 517, 521, 526; Small Ceramic Package Sizes

The new and updated CTS models provide the design engineer a cost effective, small package solution; a high precision clock with a low noise frequency reference signal, tight stability options, featuring ±0.5ppm over operating temperature range -40°C to +85°C supporting GPS applications, and a choice between Clipped Sine or HCMOS outputs.  Optional Voltage Control for frequency tuning [clipped sine devices] and Output Enable/Disable function [HCMOS devices] are also available.

Features

• Clipped Sine or HCMOS Output
• Low Phase Jitter Performance
• Stability Options – ±0.5ppm to ±2.5ppm
• Temperature Range to -40°C to +85°C
• Analog Temperature Compensation Engine
• Voltage Control Option for Frequency Tuning [Clipped Sine Only]
• Output Enable/Disable Standard [HCMOS Only]

EXL Inductor | Eaton

Eaton’s EXL is a family of next-generation pressed powder high-current inductors.

They provide a wide range of inductances from 0.15 µH to 15 µH. Eaton’s EXL inductors are available in 5 high power density sizes: 4 mm, 5 mm, 6 mm, 7 mm, and 10 mm. Their advanced molded construction is excellent for higher currents requiring low saturation and stability across a wide operating temperature range (-40 °C up to +125 °C). Each product in the EXL line is magnetically shielded for superior EMI immunity.

NIC 3.0 EMI Gaskets | Laird Performance Materials

Laird Performance Materials Precision Metals – NIC 3.0 Electromagnetic Interference (EMI) Gaskets are precision components that meet Open Compute Project (OCP) – NIC 3.0 specification. The NIC 3.0 specification defines a third-generation mechanical form factor that allows for interoperability between compliant baseboards and OCP NIC 3.0 cards. Laird Performance Materials Precision Metals – NIC 3.0 Modules address some of the limitations of NIC 2.0, such as board space, mechanical profile, connector placement, and specification quality.

• Precision components for OCP – NIC 3.0. NIC 3.0
• Small form factor (SFF) and large form factor (LFF) versions
• Modules include fingerstock and side-spring parts

Coiltronics / Eaton MPI2010V1 Miniature Power Inductors | Eaton

Eaton MPI-V2 Miniature Power Inductors offer low EMI and a high current carrying capacity.

Coiltronics/Eaton MPI2010V1 Miniature Power Inductors feature a 2.2A to 5.5A current range, maximum 2.2µH inductance range, and -40°C to +125°C temperature range. These inductors offer a high current carrying capacity in a compact 0806 footprint, rugged construction, and a high current, low power design. Coiltronics/Eaton MPI2010V1 Miniature Power Inductors are ideal for digital cameras, portable media devices, and mobile/smart phone applications.

NextPowerS3 MOSFETs | Nexperia

Nexperia NextPowerS3 MOSFETs are a high-performance 25V, 30V, and 40V MOSFET platform incorporating Nexperia’s unique superjunction technology. The NextPowerS3 are offered in the copper-clip LFPAK package, delivering low RDS(on), and demonstrating a continuous current capability up to 380A. With synchronously working parameters, the NextPowerS3 MOSFETs uniquely positioned high performance and highly reliable MOSFETs without compromise.

Fabric-Over-Foam Gaskets | Laird

Laird FOF Gaskets provide soft shielding with a durable design to suppress the Electromagnetic Interference (EMI).

Laird's fabric-over-foam gaskets are ideal for applications that require low compression force but still need high conductivity and shielding attenuation. If you’re looking to protect computer, telecommunications, or other equipment that requires soft shielding, Laird provides fabric-over-foam gaskets in a variety of shapes and thickness to meet your needs.

Tflex SF10 | LAIRD

Silicone Free Thermal Gap Filler

Product Description

Features and Benefits

Band 13 UMD Series | CTS

UMD013A Ceramic Duplexer

Ceramic duplexer supports a universal footprint across all FDD frequency bands < 1 GHz enabling the use of a common system PCB. Provides superior rejection, insertion loss, reliability, as well as both peak and average power handling compared to other duplexer technologies.

EPM DC-DC Converter | Eaton

Eaton Power Modules (EPM) are non-isolated DC-DC converters available in two families; the EPM78Vx and EPM12V.

These products have higher efficiencies than popular linear regulators and offer a wide input voltage range, lower power consumption, and programmable features in a compact package. EPM has operating temperatures ranging from -40 °C up to +90 °C and complies with the EN62368 safety standard. Both families also offer short circuit protection to protect the module during overcurrent events.